IKEA BESTÅ TV bench with drawers instructions
Full Product Name: IKEA BESTÅ TV bench with drawers, white stained oak effect/Selsviken/Nannarp high-gloss/white, 47 1/4x16 1/2x18 7/8 "
Article Number: 491.883.26
Number of user manuals: 6
Manuals and Parts List
There are 6 assembly instruction manuals to fully build IKEA BESTÅ TV bench with drawers. Scroll down to view all.
1. Instructions for IKEA Besta drawer frame white stained oak effect
2. Instructions for IKEA Besta drawer runner soft closing
3. Instructions for IKEA Besta shelf white stained oak effect
4. Instructions for IKEA Besta support leg gray
5. Instructions for IKEA Besta tv unit white stained oak effect
IKEA parts list for Besta tv unit white stained oak effect:
IKEA BESTÅ Product Details
BESTÅ TV bench with drawers, white stained oak effect/Selsviken/Nannarp high-gloss/white, 47 1/4x16 1/2x18 7/8 "
Article number: 491.883.26
It’s easy to keep the cords from your TV and other devices out of sight but close at hand, as there are several cord outlets at the back of the TV bench.
The cable outlet at the top lets cords run down smoothly into the TV bench.
The legs raise your BESTÅ combination from the floor, giving it a light airy look and making it easy to clean the floor underneath.
The two drawers make it easy to keep remote controls, game controls and other TV accessories organized.
The drawer has an integrated push-opener, so you don’t need handles or knobs and it will open with just a light push.
The drawer runners are adjustable so you can adjust the front both horizontally and in depth.
Measurements:
Width: 47 1/4 " (120 cm)Depth: 16 1/2 " (42 cm)
Height: 18 7/8 " (48 cm)
Max load/shelf: 44 lb (20 kg)
Maximum load/drawer: 22 lb (10 kg)
Drawer width (inside): 20 1/8 " (51 cm)
Drawer depth (inside): 12 3/4 " (32.5 cm)
Max. TV weight: 35 lb (16 kg)
Related Product Manuals
Need help?
Have a question about IKEA BESTÅ or Need to request a missing manual?
Questions and Answers
Number of questions: 3
Reynolds Dennis
Posted on Feb 21, 2023I am having some issues with the drawers not opening smoothly. The drawers are quite stiff and it takes a bit of effort to open them. Is there something I can do to loosen them up or should I consider replacing the drawer runners?
Kenzo @ EasyRebuild
Answered on Feb 23, 2023The issue with the drawers not opening smoothly is likely due to the drawer runners needing some adjustment. Here are the steps to troubleshoot and fix this:
1. First, check if the drawer runners are properly installed and aligned. Ensure they are not obstructed or rubbing against anything.
2. If the installation looks correct, try adjusting the depth of the drawer runners. There are usually screws or mechanisms that allow you to fine-tune the depth adjustment. This can help reduce any stiffness or friction.
3. You can also try lubricating the drawer runners with a silicone-based lubricant. Apply a small amount to the moving parts of the runners, which will help them glide more smoothly.
4. If the above steps don't resolve the issue, you may need to replace the drawer runners. The runners may be worn out or damaged, causing the stiffness. Replacement drawer runners are available from IKEA and are relatively easy to install.
By following these troubleshooting steps, you should be able to get your BESTÅ TV bench drawers opening smoothly again without needing to replace the entire unit
Velasquez Thomas
Posted on Dec 09, 2022I purchased the BESTÅ TV bench with drawers and I'm having trouble adjusting the drawer runners to fit my specific needs. Can you provide more detailed instructions on how to adjust the front of the drawers both horizontally and in depth?
Alice @ EasyRebuild
Answered on Dec 11, 2022To adjust the front of the drawers on the BESTÅ TV bench both horizontally and in depth:
1. Pull the drawer out completely from the cabinet.
2. Locate the adjustment screws on the sides of the drawer runners. There are typically two screws per side.
3. To adjust the drawer horizontally, loosen the screws slightly and shift the drawer left or right as needed. Tighten the screws once the drawer is positioned correctly.
4. To adjust the drawer in depth, loosen the screws and push or pull the drawer front in or out as required. Tighten the screws once the depth is adjusted.
5. Close the drawer and check the fit. Repeat the adjustment process as needed until the drawer front is positioned exactly how you want it.
The key is to make small adjustments and test the drawer after each change. Take your time to get the positioning just right
Michelle
Posted on Nov 11, 2022Can the drawers be opened and closed without having to remove any objects from them, since they have no handles or knobs?
Kenzo @ EasyRebuild
Answered on Nov 13, 2022Yes, the drawers can be opened and closed without having to remove any objects from them. The product description states that the drawers have an "integrated push-opener, so you don't need handles or knobs and it will open with just a light push."