IKEA GODMORGON / ODENSVIK sink cabinet with 4 drawers instructions

To clean and maintain the drawers in the GODMORGON / ODENSVIK sink cabinet, follow these steps:

Wipe down the drawers regularly with a damp cloth to remove any water spots or mineral deposits. Avoid using abrasive cleaners or scrubbing pads, as these can damage the surface.

For tougher buildup, make a solution of warm water and mild dish soap. Dip a soft cloth into the solution and gently wipe down the drawers. Rinse with a clean, damp cloth afterward.

If you notice any stubborn water spots or mineral deposits, you can try using a small amount of white vinegar on a soft cloth. Gently rub the affected areas, then rinse thoroughly.

Be sure to dry the drawers completely after cleaning to prevent any further water damage or staining. You can also use a microfiber cloth to buff the drawers and restore their shine.

Regular, gentle cleaning is the best way to maintain the drawers and keep them looking their best over time

To assemble the drawers correctly, follow these steps:

1. Locate the drawer slides that came with the cabinet. There should be 4 sets of slides - one for each drawer.

2. Attach the stationary part of the drawer slide to the inside of the cabinet. Make sure it is aligned properly and securely fastened.

3. Next, attach the moving part of the drawer slide to the side of the drawer box. Ensure it aligns with the stationary part attached to the cabinet.

4. Carefully insert the drawer box into the cabinet, guiding the moving slide part into the stationary part. Push the drawer all the way in until it clicks into place.

5. Repeat steps 3-4 for the remaining 3 drawers.

6. Test each drawer to ensure it opens and closes smoothly without any obstructions.

If you're still having trouble, there are detailed assembly videos available on IKEA's website that may provide more visual guidance. Let me know if you have any other questions

You can easily clean or replace the aerator device on the faucets yourself without needing to contact IKEA customer service. Here are the steps:

1. Turn off the water supply to the faucet by locating the shut-off valves below the sink and turning them clockwise.

2. Remove the aerator from the end of the faucet by unscrewing it counterclockwise. You may need pliers or a wrench to loosen it.

3. Soak the aerator in vinegar or a descaling solution for 15-20 minutes to dissolve any mineral buildup.

4. Rinse the aerator thoroughly and use a small brush to gently clean any remaining debris.

5. Reattach the aerator by screwing it back onto the faucet end clockwise.

6. Turn the water supply back on by turning the shut-off valves counterclockwise.

This should resolve the clogged aerator issue and restore proper water flow from your GODMORGON / ODENSVIK faucets. Let me know if you have any other questions