IKEA MALM high bed frame/2 storage boxes instructions
Full Product Name: IKEA MALM High bed frame/2 storage boxes, gray stained/Luröy, Twin
Article Number: 193.857.76
Number of user manuals: 2
Manuals and Parts List
There are 2 assembly instruction manuals to fully build IKEA MALM high bed frame/2 storage boxes. Scroll down to view all.
1. Instructions for IKEA Malm bed frame gray stained
IKEA MALM Product Details
MALM High bed frame/2 storage boxes, gray stained/Luröy, Twin
Article number: 193.857.76
The 2 large drawers on casters give you an extra storage space under the bed.
Adjustable bed sides allow you to use mattresses of different thicknesses.
LURÖY slatted bed base with curved slats helps to absorb your body weight and supports your body, while the open construction allows air to circulate and keeps the mattress fresh.
A clean design that’s just as beautiful on all sides – place the bed on its own or with the headboard against a wall. You also get spacious storage boxes that roll out smoothly on casters.
Measurements:
Height of drawer (inside): 5 7/8 " (15 cm)Length: 78 3/8 " (199 cm)
Width: 44 1/8 " (112 cm)
Drawer width (inside): 36 1/4 " (92 cm)
Drawer depth (inside): 23 1/4 " (59 cm)
Footboard height: 15 " (38 cm)
Headboard height: 39 3/8 " (100 cm)
Mattress length: 74 3/8 " (189 cm)
Mattress width: 38 1/4 " (97 cm)
Height: 39 3/8 " (100 cm)
Related Product Manuals
Need help?
Have a question about IKEA MALM or Need to request a missing manual?
Questions and Answers
Number of questions: 3
Lauren
Posted on Mar 12, 2024I'm having trouble assembling the MALM bed frame. The instructions are unclear and I'm struggling to attach the footboard to the side rails. Can you provide a clearer diagram or step-by-step guide on how to assemble this part?
Kenzo @ EasyRebuild
Answered on Mar 14, 2024To attach the footboard to the side rails on the MALM bed frame:
1. Ensure you have all the necessary hardware pieces, including the footboard, side rails, and screws/bolts.
2. Locate the pre-drilled holes on the ends of the side rails where the footboard will connect.
3. Position the footboard so the holes line up with the holes on the side rails.
4. Insert the screws/bolts through the footboard and into the side rail holes. Tighten securely using the appropriate tools.
5. Double-check that the footboard is firmly attached to the side rails and all connections are tight.
If you're still having trouble, I'd recommend reviewing the assembly instructions again carefully or reaching out to IKEA customer service for further guidance. They should be able to provide more detailed assistance
David Harmon
Posted on Dec 16, 2022I've noticed that the storage boxes have wheels, but are not very stable when fully extended.
Is there a way to secure them in place or prevent them from sliding around?
Kenzo @ EasyRebuild
Answered on Dec 18, 2022To help stabilize the storage boxes and prevent them from sliding when fully extended, you can try the following:
1. Adjust the caster wheels: Ensure that all the caster wheels are properly installed and tightened. If any of the wheels are loose, tighten them to provide a more secure and stable connection.
2. Use anti-slip mats: Place anti-slip mats or pads under the storage boxes when they are fully extended. This will help create more friction and prevent the boxes from sliding around.
3. Install drawer stops: You can purchase and install drawer stops or guides that will limit the extension of the boxes and keep them in place when opened. This will provide additional stability and prevent the boxes from sliding out too far.
4. Secure the boxes with straps or hooks: Consider using straps, hooks, or other securing mechanisms to anchor the storage boxes in place when fully extended. This will help keep them stable and prevent unwanted movement.
By implementing one or more of these solutions, you should be able to improve the stability and prevent the storage boxes from sliding around when fully extended
Denise Hunt
Posted on Sep 20, 2022I'm having trouble assembling the MALM bed frame, specifically with attaching the storage boxes to the bed frame. Can you provide more detailed instructions or a video tutorial on how to do this step correctly?