IKEA MITTBACK trestle instructions

To attach the legs to the frame properly, here are some detailed steps:

1. Ensure all the necessary hardware (screws, washers, etc.) is present and accounted for before starting assembly.

2. Carefully align the leg with the corresponding mounting points on the frame. The leg should fit snugly into the frame without any gaps.

3. Insert the screws through the frame and into the leg, making sure they are tightened securely. Do not over-tighten.

4. Repeat this process for each leg, checking that they are all aligned evenly before fully tightening.

5. Once all legs are attached, go back and double-check that all screws are tight. This will help prevent any looseness or crookedness.

If you're still having trouble, I'd recommend watching the MITTBACK assembly video on the IKEA website. This provides visual guidance that may help clarify the leg attachment process. Let me know if you have any other questions

The legs of the MITTBACK trestle are removable and can be replaced with other leg options. The product description states that you can "Mix and match your choice of table top and legs. By buying them separately, you can create a combination with design and size that fits perfectly into your available space." This indicates that the legs are not permanently attached to the trestle and can be swapped out as desired

To properly attach the legs to the Mittback trestle tabletop, please follow these steps:

1. Ensure you have all the necessary hardware and tools required for assembly, as specified in the instruction manual.

2. Position the tabletop upside down on a flat, stable surface.

3. Locate the pre-drilled holes on the underside of the tabletop where the legs will attach.

4. Align the leg brackets with the pre-drilled holes, making sure they are oriented correctly.

5. Insert the bolts through the leg brackets and into the pre-drilled holes, then tighten them securely using the appropriate tools.

6. Repeat this process for each of the four legs.

7. Once all legs are attached, carefully flip the trestle over and ensure it is stable and level.

If you are still having difficulty, I would recommend reviewing the instruction manual again carefully or contacting IKEA customer service for further assistance

To assemble the MITTBACK trestle, I would recommend following the included assembly instructions carefully. These will provide step-by-step guidance to ensure a smooth and successful assembly process.

Additionally, IKEA has online assembly guides and tutorial videos available that can be very helpful. You can find these by searching for "MITTBACK trestle assembly" on the IKEA website or YouTube. These visual aids can make the process even easier to follow.

Take your time during assembly, double-check each step, and don't hesitate to reach out to IKEA customer service if you have any questions or run into any issues. With the right guidance, you'll have your new MITTBACK trestle set up in no time

The MITTBACK trestle does not come with printed assembly instructions, but you can find the assembly guide online on the IKEA website. Here are the steps to assemble the MITTBACK trestle correctly:

1. Start by laying out all the parts and hardware that came in the package. Ensure you have everything needed before beginning.

2. Attach the two trestle legs to the trestle top using the screws provided. Make sure the legs are securely fastened.

3. To adjust the tilt function, locate the knob on the underside of the trestle top. Turn the knob clockwise to tilt the top up, and counterclockwise to tilt it down.

4. Once the tilt is set to your desired angle, you can place your tabletop of choice on the trestle and secure it in place.

5. Finally, attach the shelf underneath the trestle using the provided brackets and screws.

Let me know if you have any other questions! The assembly process is straightforward, but feel free to reach out if you need any clarification