IKEA EKET cabinet instructions

To remove the legs/feet of the EKET cabinet, follow these steps:

1. Lay the cabinet on its back on a soft surface to avoid scratching.
2. Locate the screws or bolts attaching the legs/feet to the cabinet.
3. Use the appropriate screwdriver or wrench to loosen and remove the screws/bolts.
4. Gently pull the legs/feet away from the cabinet.
5. If the legs/feet are secured with plastic clips, you may need to pry them off carefully.
6. Once the legs/feet are removed, you can then mount the cabinet on the wall using the suspension rails

To assemble the EKET cabinet, follow these steps:

1. Ensure you have all the necessary parts and hardware. The instruction manual should have been included in the packaging.

2. Start by attaching the two side panels to the top and bottom panels. The cabinet uses a wedge dowel system, so the panels should click into the pre-drilled holes.

3. Make sure the panels are aligned properly and tightened securely. You may need to apply some force to fully click the panels into place.

4. If you're having trouble with the top and bottom panels, double-check that the side panels are properly installed first. The top and bottom panels should then fit snugly into the side panels.

5. Refer to the instruction manual if you need any clarification on the assembly steps. The manual will have detailed illustrations to guide you through the process.

Let me know if you have any other questions