IKEA MELLTORP / LIDÅS table and 2 chairs instructions

To get the chairs to fit snugly under the Melltorp/Lidås table, you can try the following:

1. Check if the table legs are fully tightened and secured. Loose table legs can cause the tabletop to sit at an uneven height, making it difficult for the chair legs to align properly.

2. Ensure the chair legs are fully inserted into the chair frame. Double-check that all the chair leg bolts are tightened securely.

3. If the chair legs still seem too long, you can try adjusting the leveling glides on the bottom of the chair legs. Gently turn the glides clockwise to shorten the chair legs and allow them to fit better under the table.

4. As a last resort, you can try carefully trimming a small amount off the bottom of the chair legs using a saw or grinder. This should only be done as a last option, as it may affect the stability of the chairs.

By following these steps, you should be able to get the Melltorp/Lidås chairs to fit snugly and comfortably under the table

To attach the legs to the tabletop on the MELLTORP / LIDÅS table, here are the steps:

1. Locate the metal table frame pieces and the tabletop. The frame will have pre-drilled holes that align with the underside of the tabletop.

2. Place the tabletop upside down on a flat surface. Position the metal frame legs so the pre-drilled holes line up with the holes on the tabletop.

3. Secure the legs to the tabletop using the screws provided in the hardware pack. Tighten the screws fully to ensure a sturdy connection.

4. Once all four legs are attached, carefully flip the table right-side up and do a final check that the legs are securely fastened.

If you have any other questions during the assembly process, refer back to the instruction manual or contact IKEA customer service for further guidance. Let me know if you need any clarification on these steps