IKEA BESTÅ TV bench with drawers instructions

The issue with the soft-closing mechanism on the drawer is likely due to misalignment or a problem with the drawer slides. Here are the steps to troubleshoot and fix the problem:

1. First, check if the drawer is properly aligned within the cabinet frame. Ensure that the drawer is sitting evenly and not tilted.

2. Inspect the drawer slides to see if they are properly installed and not obstructed. Clean any debris or dust from the slides.

3. Adjust the soft-closing mechanism if needed. There should be adjustment screws or levers on the drawer slides that control the soft-close tension. Tighten or loosen these as necessary to get the desired closing action.

4. If the problem persists, the drawer slides may need to be replaced. You can order replacement slides from IKEA and follow the instructions to properly install them.

5. As a last resort, you may need to adjust the drawer front itself if it is not aligned properly. This may require loosening the screws and repositioning the drawer front.

Let me know if these troubleshooting steps help resolve the issue with the soft-closing drawer

To remove the cord outlet at the back of the BESTÅ TV bench:

1. Unplug any cords or cables connected to the cord outlet.
2. Locate the screws securing the cord outlet to the back panel of the TV bench.
3. Using a screwdriver, remove the screws to detach the cord outlet.
4. This will allow you to remove the cord outlet and access the back panel for cleaning.

If you need to replace the cord outlet, you can purchase a replacement part from IKEA and follow the same steps to install the new one. Make sure the replacement part is compatible with your BESTÅ TV bench model.

After cleaning or replacing the cord outlet, simply re-attach it to the back panel using the screws

The soft-closing function on the BESTÅ TV bench drawers can sometimes wear out over time, causing them to not close as smoothly. Here are a few things you can try to restore the soft-close functionality:

First, check if the drawers are properly aligned and sliding smoothly on the tracks. Ensure there is no debris or obstructions preventing the drawers from closing properly. You can clean the tracks with a soft cloth to remove any buildup.

Next, check the soft-close mechanisms themselves. These are typically small hydraulic dampers attached to the drawer slides. Over time, the fluid in these dampers can leak out, reducing their effectiveness. You may need to replace the soft-close mechanisms to restore the smooth, quiet closing action.

If replacing the soft-close mechanisms doesn't work, you can also try adjusting the tension on the drawer slides. Consult your BESTÅ instruction manual for guidance on how to do this properly.

With a little troubleshooting, you should be able to get your BESTÅ TV bench drawers closing softly and smoothly again

The issue with the drawers not closing properly on your BESTÅ TV bench could be due to a few possible reasons:

1. Drawer alignment - The drawers may have become misaligned over time. Try adjusting the drawer fronts by loosening the screws and shifting the drawer front slightly until it closes smoothly.

2. Soft-closing mechanism - The soft-closing mechanism could be wearing out. This is a common issue over time. You can try lubricating the mechanism with a silicone-based furniture polish to help it operate more smoothly.

3. Obstruction - Ensure there are no obstructions preventing the drawers from closing fully, such as cables or items inside the drawer.

If adjusting the alignment and lubricating the mechanism does not resolve the issue, the soft-closing function may need to be replaced. This is a relatively simple repair that you can do yourself by ordering replacement soft-closing hinges from IKEA