IKEA EKET wall-mounted shelving unit instructions
Full Product Name: IKEA EKET Wall-mounted shelving unit, white, 13 3/4x13 3/4x13 3/4 "
Article Number: 492.858.17
Number of user manuals: 2
Manuals and Parts List
There are 2 assembly instruction manuals to fully build IKEA EKET wall-mounted shelving unit. Scroll down to view all.
1. Instructions for IKEA Eket cabinet white
IKEA EKET Product Details
EKET Wall-mounted shelving unit, white, 13 3/4x13 3/4x13 3/4 "
Article number: 492.858.17
With wall-mounted EKET, you make the most of the wall area, while freeing up space on the floor.
A simple unit can be enough storage for a limited space or the foundation for a larger storage solution if your needs change.
Assembly is quick and easy, thanks to the wedge dowel that clicks into the pre-drilled holes.
This clever EKET cabinet is always ready to lend a hand, whether it’s for storing, organizing or emptying your pockets. Go for a color that pops out or keep it discreet.
Measurements:
Width: 13 3/4 " (35 cm)Depth: 13 3/4 " (35 cm)
Height: 13 3/4 " (35 cm)
Max load/shelf: 15 lb (7 kg)
Related Product Manuals
Need help?
Have a question about IKEA EKET or Need to request a missing manual?
Questions and Answers
Number of questions: 3
Tamara Gray
Posted on Jan 09, 2024I'm having trouble assembling the EKET wall-mounted shelving unit. The wedge dowel is not clicking into the pre-drilled holes as described in the instructions. What could be the issue?
T. Gray
Ingram David
Posted on Feb 06, 2023I am trying to install the EKET shelving unit on a plaster wall. The instructions say to screw into pre-drilled holes, but my wall does not have these holes. What is the recommended method for installing the shelf on a plaster wall?
Kenzo @ EasyRebuild
Answered on Feb 08, 2023To install the EKET shelving unit on a plaster wall without pre-drilled holes, the recommended method is to use wall anchors. Here are the steps:
1. Locate the wall studs using a stud finder. Try to position the shelving unit so that at least one of the mounting points aligns with a wall stud.
2. For the mounting points that do not align with studs, drill pilot holes slightly smaller than the diameter of your wall anchors.
3. Insert the wall anchors into the pilot holes and gently tap them in until flush with the wall surface.
4. Align the shelving unit and secure it to the wall by screwing directly into the wall anchors.
5. For the mounting points that align with wall studs, you can screw directly into the studs without the need for wall anchors.
This method will provide a secure and stable installation of the EKET shelving unit on your plaster wall. Let me know if you have any other questions
Jermaine Medina
Posted on Nov 30, 2022I am having trouble assembling the Ekett shelving unit. The dowel is not fitting into the pre-drilled holes as described in the instructions. What could be causing this issue and how can I resolve it?
Jermaine Medina
Kenzo @ EasyRebuild
Answered on Dec 02, 2022The issue with the dowel not fitting into the pre-drilled holes is likely due to the holes not being properly aligned. Here are a few steps you can try to resolve this:
1. Double-check that you have all the necessary parts and that they are the correct ones for the EKET shelving unit.
2. Ensure the panels are positioned correctly according to the assembly instructions. The pre-drilled holes need to be properly aligned for the dowels to fit.
3. Try gently tapping the dowel into the hole using a rubber mallet or a piece of wood. Avoid using excessive force, as this could damage the components.
4. If the dowel still doesn't fit, inspect the holes to make sure they are not obstructed or damaged. You may need to slightly enlarge the holes using a drill bit of the appropriate size.
5. Ensure all the panels are level and square before attempting to insert the dowels. This will help the holes align properly.
If you continue to have issues, please refer to the assembly instructions or contact IKEA customer service for further assistance