IKEA EKET cabinet with 2 drawers instructions

To ensure the EKET cabinet is securely mounted to the wall using the suspension rails:

1. Locate the wall studs and mark their positions. The suspension rails need to be screwed into the wall studs for maximum support.

2. Use a stud finder to locate the wall studs. Mark their positions with a pencil.

3. Position the suspension rails at the desired height on the wall, aligning them with the marked stud locations.

4. Securely screw the suspension rails into the wall studs using the provided screws. Make sure the rails are level.

5. Carefully lift the cabinet and hang it onto the installed suspension rails. Apply pressure to ensure it is properly engaged.

6. Check that the cabinet is level and securely mounted to the wall. Make any necessary adjustments to the rails.

Following these steps will ensure the EKET cabinet is properly and safely installed on the wall using the suspension rails

The issue with the stuck push-opener on the drawer is likely due to a buildup of dust, debris, or friction within the mechanism. Here are the steps to troubleshoot and fix this problem:

1. First, try gently cleaning the push-opener mechanism. Use a soft, dry cloth to wipe away any visible dust or dirt accumulation.

2. If the push-opener still feels stuck, you can try applying a small amount of silicone-based lubricant or furniture polish to the mechanism. This will help reduce friction and allow the drawer to open smoothly.

3. Check that the drawer is properly aligned within the cabinet. If the drawer is slightly off-center, it can cause the push-opener to bind. Adjust the drawer alignment as needed.

4. As a last resort, you may need to replace the push-opener mechanism. This is a relatively simple repair that can be done by ordering a replacement part from IKEA and following their instructions for installation.

Let me know if the drawer is still giving you trouble after trying these troubleshooting steps

The issue with the stuck drawer on your EKET cabinet is likely due to the drawer glides not functioning properly. Here are the steps to troubleshoot and fix the problem:

1. First, check if there is any obstruction or debris preventing the drawer from sliding smoothly. Gently pull the drawer out as far as possible and examine the drawer glides for any obstructions.

2. If the drawer glides appear clean, the issue may be with the push-opener mechanism. Try pushing the drawer in firmly and then pulling it out again. This can sometimes help reset the push-opener.

3. If the drawer still does not open smoothly, the drawer glides may need lubrication. Apply a small amount of silicone-based furniture polish or lubricant to the glides and try opening the drawer again.

4. As a last resort, you may need to remove the drawer and inspect the glides more closely. Ensure they are properly installed and not damaged. Replace the glides if necessary.

By following these steps, you should be able to resolve the issue with the stuck drawer on your EKET cabinet

The EKET cabinets are not designed to have their drawers connected between two separate units. Each EKET cabinet is a standalone unit with its own independent drawers.

There is no hardware or screws provided by IKEA to connect the drawers of two EKET cabinets together. The drawers are meant to function independently within each individual cabinet.

If you would like to combine two EKET cabinets, you can place them side-by-side or stack them vertically. However, the drawers will remain separate and cannot be linked between the two units. The best way to create a unified storage solution is to use the EKET wall-mounted cabinets and combine them as needed